The Mink MV 1202 A is the largest dry claw vacuum pump of the proven Mink series. Mink claw vacuum technology offers the highest level of energy efficiency for industrial vacuum generation combined with the lowest level of maintenance as well as consistent performance. The MV 1002 A size also offers these advantages for applications requiring high pumping speeds.
With Mink vacuum pumps, two claw-shaped rotors turn in opposite direction inside the housing. Due to the shape of these claw rotors, the air or gas is sucked in, compressed and discharged. The claw rotors do not come into contact either with each other nor with the cylinder in which they are rotating. Tight clearances between the claw rotors and the housing optimise the internal seal and guarantee a consistently high pumping speed. A synchronisation gearbox ensures exact synchronisation of the claw rotors. Mink vacuum pumps are driven by a directly flange-mounted asynchronous motor, with an efficiency class IE2 / IE3. Mink claw vacuum pumps are ideally suited to use with frequency-controlled drives.
Mink claw vacuum pumps are available in a wide range of sizes. There are also variants for special applications such as dust and gas explosion protection, high steam contents, gas tightness and increased oxygen contents.
| Technical data | Mink MV 1202 A | ||
| Nominal pumping speed | m³/h | 50 Hz | 950 |
| Ultimate pressure | hPa (mbar) | 50 Hz | 200 |
| Nominal motor rating | kW | 50 Hz | 18.5 |
| Nominal motor speed | min⁻¹ | 50 Hz | 3000 |
| Noise level (ISO 2151)* | dB(A) | 50 Hz | 79 |
| Weight approx. | kg | 750 | |
| Dimensions | mm | 1620 x 670 x 1210 | |
| Gas inlet / outlet | DN 100 PN 10/16 / DN 100 PN 10/16 | ||
| *at 400 hPa (mbar) inlet pressure | |||
