Rugged and compact high voltage motors in fin, water jacket and tube cooling. Designed for applications in extreme environments and hazardous zones, especially in oil, gas and petrochemical industry. Available in all of the usual types of explosion protection – also double protection, degrees of protection up to IP66 (special designs up to IP68), special paint finishes, high and low temperature versions and cooling types tailored to the application – make them predestined for sectors such as oil, gas and
The LOHER VARIO is available in three different cooling frame types
LOHER VARIO – Fin cooled 0.15 – 2.8 MW
Well suited to Zone 1 and highly explosive environments, including those containing hydrogen. Also certified for low temperatures, suitable for use in arctic environments Extremely rugged due to torsional stiff steel frame On request also available in double protection Ex d and Ex e Double certified motors for use in hazardous zones with gas or dust
Water jacket cooled up to 1.85 MW, commonly used in offshore applications
Compact design to reduce space required and transport costs Very low maintenance water jacket cooling system Long service life as a result of the uniform cooling Seawater/saltwater can be directly used as coolant Extremely quiet as they have no outer fan – even when converter operated Extremely high overload capability
Water jacket cooled up to 1.85 MW, commonly used in offshore applications
Compact design to reduce space required and transport costs Very low maintenance water jacket cooling system Long service life as a result of the uniform cooling Seawater/saltwater can be directly used as coolant Extremely quiet as they have no outer fan – even when converter operated Extremely high overload capability
LOHER VARIO Tube cooled 1.9 – 7 MW
Very rugged with stainless steel cooling pipes Special inner cooling system with X ventilation, axial and radial cooling slots for a uniform temperature distribution Flameproof enclosure (Ex d) up to 7 MW
Safe operation also in exceedingly hazardous areas, e.g., LNG tankers Predestinated for extreme locations, e.g. offshore rigs Increased stiffness, low vibration levels, maximum reliability Outstanding suitability for deserts and arctic regions Highly modifiable for individual customer demands retrofit applications
Covering all of the applicable types of ex-protection Degree of protection up to IP66 (special designs up to IP68) Engineered based on international standards (ATEX, NEPSI, EAC (Gost), CCOE certified) Extremely rugged due to torsional stiff steel frame Available in high and low temperature design
| Shaft heights: | 355 – 1000 mm |
| Power range: | 0.15 – 7 MW |
| No. of poles: | 2 – 16 poles (higher on request) |
| Rated voltages: | 3 – 11kV (higher on request) |
| Degree of protection: | IP55, IP56, IP65, IP66 (special designs up to IP68) |
| Cooling type: | IC 411, IC 416, IC 511, IC 516, IC 71 W |
| Explosion protection: | – Non sparking, Zone 2, II 3 G Ex nA IIC T3 Gc |
| – Increased safety, Zone 1, II 2 G Ex e IIC T3 Gb | |
| – Flameproof, Zone 1, II 2 G Ex de IIB T4 Gb | |
| – Flameproof, Zone 1, II 2 G Ex de IIC T4 Gb | |
| – Pressurized, Zone 1, II 2 G Ex px IIC T3 Gb |
