Dry Claw Vacuum Pumps and Compressors BUSCH MINK MM 1202 – 1322 AP Series

Mink claw compressors were developed specifically for the reliable compression of air and other gases. Modern Mink claw technology guarantees an efficient and constant overpressure supply for numerous industrial applications of up to 2 bar(g).

Brand:

Dry Claw Vacuum Pumps and Compressors BUSCH MINK MM 1202 – 1322 AP Series

 

The output of Mink claw compressors is determined by the choice of motor. Motors may be selected to provide between 0.7 and 2.0 bar(g) as required by the application, ensuring efficient blast air and compressed air generation.

The contact-free operating principle of claw technology provides the additional benefit of nearly maintenance-free operation: None of the internal moving parts of the compressor come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry-running claw technology of Mink claw compressor allows them to run without operating fluids in the compression chamber. The pumped medium is not contaminated, and may be used later without filtration or cleaning. In addition, no costs arise for the purchase, replacement and disposal of operating fluids.

Mink claw vacuum compressors are aircooled, so no effort for the installation and maintenance of a cooling system is required. Their contact-free operating principle allows them to run extremely efficiently, and the volume flow remains consistently high throughout the entire life cycle.

The outstanding reliability and long service lifetime of Mink claw compressors are also a result of the contact-free and dry compression. An intelligent sound insulation design allows Mink claw compressors to operate at low noise levels.

 

Technical specification

Mink claw compressors feature two clawshaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the claw rotors and the chamber housing optimizes the internal seal and ensures a constantly high volume flow. A synchronizing gearbox maintains precise rotor timing. Mink claw compressors are driven by a directly flange-mounted motor of efficiency class IE3. Mink claw compressors are equipped with an inlet filter and a pressure relief valve as standard equipment.

 

<p>

SPECIFICATIONS BUSCH MINK MM 1202 – 1322 AP SERIES

Technical data Mink MM 1202 AP Mink MM 1252 AP Mink MM 1322 AP
Volume flow m³/h 50 Hz 200 245 300
Overpressure bar 50 Hz 0.7 – 2.0 0.9 – 2.0 1.0 – 2.0
Nominal motor rating kW 50 Hz 6.0 – 11.0 7.5 – 15.0 11.0 – 18.5
Nominal motor speed min⁻¹ 50 Hz 3000 3000 3000
Noise level (ISO 2151) dB(A) 50 Hz 80 81 82
Weight approx. (without motor) kg  210 230 255
Dimensions (L x W x H) mm  1345 x 515 x 660 1385 x 515 x 660 1425 x 515 x 660
Gas outlet   G 2″ G 2″ G 2″
</p>

{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

ขอใบเสนอราคา/Request a quote

ขอใบเสนอราคา/Request a quote