เพรสเชอร์ทรานสมิตเตอร์ (เครื่องส่งสัญญาณความดัน) DANFOSS MEP 2200/2250 Series

เพรสเชอร์ทรานสมิตเตอร์ DANFOSS MEP 2200/2250 Series (Pressure Transmitters) เครื่องส่งสัญญาณความดัน มีตัวกันกระแทกแบบพัลส์ในตัว (Integrated Pulse-Snubber) ช่วยป้องกันคาวิเทชันและแรงกระแทกของของเหลวได้อย่างมีประสิทธิภาพ การออกแบบที่ดีทำให้ทนต่อแรงสั่นสะเทือนได้ดีเยี่ยมและมีความแข็งแรงเป็นพิเศษ นอกจากนี้ ยังมีการป้องกันสัญญาณรบกวนทางแม่เหล็กไฟฟ้า (EMI) ในระดับสูง ทำให้สวิตช์ความดันอิเล็กทรอนิกส์รองรับการใช้งานได้หลากหลาย

เพรสเชอร์ทรานสมิตเตอร์ (เครื่องส่งสัญญาณความดัน) DANFOSS MEP 2200/2250 Series

คุณสมบัติ
• ออกแบบสำหรับการใช้งาน OEM ที่สมบุกสมบัน
• มีเสถียรภาพระยะยาวที่ยอดเยี่ยม ปราศจากการลอยของค่า (Zero Drift)
• โครงสร้างเชื่อมปิดสนิท ป้องกันการรั่วไหล
• ส่วนสัมผัสของเหลวทำจากสแตนเลส
• รองรับอุณหภูมิของตัวกลางและสภาพแวดล้อมได้สูงสุด 125°C
• รุ่นเอาต์พุตคู่ มาพร้อมฟังก์ชันสวิตช์และสัญญาณเอาต์พุตแบบอนาล็อก:
0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V, หรือ 10 – 90% แรงดันแบบ Ratiometric
• รุ่นสวิตช์สามารถปรับค่า Hysteresis และ Time Constant ได้ตามต้องการ
• รองรับการเชื่อมต่อแรงดันและไฟฟ้าหลากหลายรูปแบบ
• ป้องกันสัญญาณรบกวนทางแม่เหล็กไฟฟ้า (EMC) สูงสุดถึง 100 V/m
• มีระบบป้องกันความร้อนเกิน

 

การใช้งาน

Pulse-snubber

 

ตัวกันกระแทกแบบพัลส์ช่วยปกป้องเซ็นเซอร์จากปัญหาคาวิเทชัน (Cavitation), แรงกระแทกของของเหลว (Liquid Hammer) และแรงดันพุ่งสูง (Pressure Peaks) ซึ่งอาจเกิดขึ้นในระบบของเหลวที่มีการเปลี่ยนแปลงความเร็วของการไหล เช่น การปิดวาล์วอย่างรวดเร็ว หรือการเริ่มและหยุดปั๊ม

ปัญหานี้อาจเกิดขึ้นได้ทั้งด้านทางเข้าและทางออกของระบบ แม้ว่าจะเป็นระบบที่มีแรงดันใช้งานต่ำก็ตาม โดยค่าความหนืดของของเหลวมีผลต่อเวลาตอบสนองเพียงเล็กน้อย ในกรณีที่ค่าความหนืดของของเหลวสูงถึง 100 cSt เวลาตอบสนองก็จะไม่เกิน 4 มิลลิวินาที

 

รูปที่ 1: ตัวกันกระแทกแบบพัลส์ (Pulse-snubber)

 

Performance (EN 60770

Type MEP 2200 and MEP 2250
Dual output (Switch and Analogue – output)
Switch Hysteresis ~ 1% FS(1)
Switch Time delay 1 ms
Accuracy
(incl. non-linearity, hysteresis and repeatability)
2% FS
Thermal accuracy < ± 0.15% FS / 10K

(1)For detailed information please contact Danfoss.

 

Overload and burst pressure – without pulse-snubber

Features Values
Nominal pressure[bar] 10 16 25 40 60 100 160 250 400 500 600 1000(2) 1600(2) 2200(2)
Overload pressure 30 48 80 80 140 200 320 500 800 1400 1400 2000 2500 3000
Burst pressure 400 640 800 800 1400 2000 1600 2500 4000 >4000 >4000 >4000 >4000 >4000

(2)Only available wih M12 × 11.5 P high pressure port, type FC06. Please contact Danfoss.

 

Overload and burst pressure – with integrated pulse-snubber

Features Values
Nominal pressure [bar] 10 16 25 40 60 100 160 250 400 500 600
Overload pressure 30 48 120 120 210 300 480 750 1200 2100 2100
Burst pressure 400 640 800 800 1400 2000 1600 2500 4000 >4000 >4000

 

Electrical specifications

Type MEP 2200 and MEP 2250
Dual output (Switch and Analogue – output)
Max. load(3) 500 mA
Electrical connector types See Electrical connections
Max. inrush load 1.6 A
Supply voltage 8 – 32 V
Over/reverse voltage ± 36 V

(3)For inductive load limits, please contact Danfoss.

 

Secondary output reference for MEP 2200/2250 Series

Nom. output signal (Short-circuit protected) NPN and PNP NPN
0 – 5, 1 – 5, 1 – 6 V 0 – 10 V 10 – 90% ratiometric
Supply voltage [UB], polarity protected 8 – 32 V 12 – 32 V  –
Supply – current consumption 4.5 mA 4.5 mA 4.5 mA
Output inpedance ≤ 90 Ω ≤ 90 Ω ≤ 90 Ω
Load [RL] (connected to 0 V) RL ≥ 10 kΩ RL ≥ 10 kΩ RL ≥ 5 kΩ
Load [RL] (connected to + V) Not possible Not possible RL ≥ 5 kΩ

 

Technical data

Features Values
Media temperature range – 40 – 125 °C
Ambient temperature range – 40 – 125 °C
Compensated temperature range – 40 – 125 °C
Transport temperature range  -55 – 150 °C
EMC – Emission EN 61326-2-3: 2013
EMC Directive 2014/30/EU
EMC – Immunity RF field 100 V/m, 26 Mhz – 1 GHz EN 61326-2-3 Cable < 30 m
3 V/m, 1.4 GHz – 2.7 GHz
Electrical performance comply with ISO 7637 pulse 1 – 4 V (MEP 26XX)
ISO 7637-2 / ISO 16750 (MEP 22XX) (pulse 5b <45 V)
Vibration stability 20 g, 10 – 2000 Hz, sinus EN 60068-2-6
Shock resistance 100 g EN 60068-2-27

 

Mechanical conditions

Materials
Wetted parts 17 – 4 PH
Enclosure AISI 304 or plastic
Pressure connection 17 – 4 PH
Electrical connection See Electrical connections

 

Configuration codes for MEP 2200/2250 Series

 

Dimensions / Combinations

Dimensions Combinations

 

Dimensions / Combinations with recommended torque

Dimensions / Combinations with recommended torque

HEX is 22 mm across flats.

 

Electrical connections

Electrical connections

 

Ordering

Ordering MEP 2200 and MEP 2250

{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

ขอใบเสนอราคา/Request a quote

ขอใบเสนอราคา/Request a quote